What
is POLARIS? POLARIS is the newest generation retrofit system with electronic
control and "master/slave" operation, gaseous LPG injection for vehicles
with spark ignition engines manufactured by STARGAS srl. The retrofit system comes
in different configurations to better adapt itself to every specific requirement.
The main components of the retrofit system are:
- Hercules
vaporiser with pressure and temperature sensor.
- Elios gas electronic control
unit in the version for 3 to 12 cylinder engines.
- Electro-injectors.
- Main
wiring.
- Change-over switch.
- Pipes and relative fittings and joints.
- Solenoid
valves.
- Filters.
- Various Components.
- Structure for fastening
the tank to the vehicle.
- Tank and relative accessories.
- Guarantee,
maintenance and user manual (to be given to the user of the system)
|  |
|
Features
of POLARIS System The Polaris retrofit system is made using the most advanced
design and manufacturing technologies, and allows a new generation of LPG systems
to be installed on vehicles. The performances of the modern ÈLIOS
gas ECU makes the master/slave management of electronic injection
for LPG in the gaseous phase, in controlled ignition engines with or without lambda
probe and catalytic converter. In the master/slave mode, the
gas ECU (slave) elaborates the injection signals coming from the cars original
petrol ECU (master) and commands the functioning of the gas injectors. This means
that the functioning strategy of the gas supply imitates the petrol functioning
strategy (phased sequential, semi-sequential, full-unit, etc.). This functioning
strategy is possible due to gas electro-injectors that ensure opening/closing
times similar to those in petrol injectors. Therefore, the new Polaris retrofit
system leads to:
- greater reliability;
- higher performances;
- lower
pollution;
- lower gas consumption.
The system is designed in
compliance with the most recent European technical regulations and is type-approved
based on the UNECE R67-01- UNECE R115-00 regulations, as well as fully compliant
with Australian standard AS/NZ 1425.
Download
Detail Introduction of POLARIS (1.1 MB)  To
Request more information and POLARIS Installation Manual Please Contact Us using
Webform.

|